Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.
Menü
Ár:
6.519 Ft (5.133 Ft + ÁFA)
Menny.:db

Red MK2B R1 PCB fűtött asztal

Ár:
6.519 Ft (5.133 Ft + ÁFA)
Menny.:db
Cikkszám: CHGS00041
Elérhetőség: Raktáron
Várható szállítás: 2022. december 12.

Leírás és Paraméterek

Red MK2B R1 PCB fűtött asztal:

60cm vezetékkel LED-del és ellenállással szerelve

Heat Bed MK2B R1 Red

This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity. Additionally, the solder pads have been greatly increased in size, making it much easier and allowing for the use of 1206 surface mount components. But this does not remove the need to use proper strain relief.

Features: 

Come with resistor and LEDs soldered, basic soldering skills needed to solder the power wire 

Dimensions (Outer): 214mm x 214mm 

Dimensions (Heat Bed): 200mm x 200mm 

Laminate FR4 1.6¡À0.15mm

2 Layer, 35¦Ìm Copper 

Power Input: 12V / 24V DC 

Copper Plated Holes

Very good in combination with RUMBA or Taurino Power